[vc_row padding_top=”0px” padding_bottom=”0px”][vc_column fade_animation_offset=”45px” width=”1/1″][/vc_column][/vc_row]
Video source missing
Low Cost Hydroforming (Video)
Low cost hydroforming on the Rainbow Aviation Video channel with your host Brian Carpenter. In this episode were going to be taking a look at a low cost way to manufacture your own aluminum hydro-formed parts. This is a companion video for technically speaking article …
Video source missing
Lift Strut Attach Fitting (Video)
53-10-50 Lift Strut Attach Fitting Video In this video we go through the installation process of the lift strut attach fittings on the fuselage frame.
01-50 Tube Marking (Video)
Another episode of “Building the EMG-6”. In this episode we look at the process of marking tubing. Pretty much every component on the EMG 6 uses tubing for construction. In this video we show you how to accurately and easily mark tubing for these applications.
53-40 Keel
Builders Guide 53 Fuselage 53-40 Keel Builders Data Base Link to 53-40 Keel Assembly
"How To" Tachometer Calibration using a Video Camera or Iphone (video)
Tachometer Calibration Video Each month we are responsible for an article that gets published in the Sport Aviation / Experimenter magazine. We also try to have a video that corresponds with these articles and create the video and the article simultaneously. Each article/video requires about …
Manufacturing the Keel Pockets (video)
53-10-08.100 Keel Pocket Another series and building the EMG-6. In this video we look at the process of manufacturing the keel pockets.
53-40-12 Lower Keel (Video)
53-40-12 Lower Keel Building the EMG-6: in this video we look at the installation of the fuselage lower keel assembly
53-40-11 Upper Keel (Video)
53-40-11 Upper Keel Building the EMG-6: in this video we show the installation procedures for the upper keel assembly
53-10-06A Instrument Panel (Video)
53-10-06A Instrument Panel Building the EMG-6: In this video we installed the instrument panel bulkhead subassembly
CNC Drilling and Cutting Fuselage Boom
Building The EMG-6 (CNC Drilling and Cutting Fuselage Boom) We’ve recently started working on the kits for the fuselage boom. The majority of the fuselage boom is built from 2024 T3 aluminum .040″ thick and all the components are CNC cut on the CNC router …
53-10-09-72 Passenger Rudder Pedal Tube Installation (Video)
Building The EMG-6 (53-10-09-72 Passenger Rudder Pedal Tube Installation) In this episode of building the EMG_6 We install the Passenger Rudder Pedal support tube for the fuselage frame
53-10-09-71 Seat To Gear Box Tube (Video)
Building The EMG-6 (53-10-09-71 Seat To Gear Box Tube) In this episode of building the EMG_6 We install the Seat To Gear Box tube for the fuselage frame
53-10-09.100 Brake Mount Tube (Video)
Building The EMG-6 (53-10-09.100 Brake Mount Tube) In this episode of building the EMG_6 We install the brake mount tube for the fuselage frame
53-10-05A Landing Gear Box Assembly (Video)
53-10-05A Landing Gear Box Assembly This is another episode in the Building The EMG-6 Series. In this episode we show how to attach the landing Gear Box to the rest of the fuselage frame.
53-10-06A Instrument Panel Instrument Panel Sub Assembly (Video)
53-10-06A Instrument Panel Instrument Panel Sub Assembly