Propeller for the EMG-6-250 We have had to undertake the task of making our own propeller for the Polini 250 installation. because of the limited propeller clearance issue on the EMG-6, the noise requirements, the horse power that we have to absorb with the 250, …
Manufacturing the Keel Pockets (video)
53-10-08.100 Keel Pocket Another series and building the EMG-6. In this video we look at the process of manufacturing the keel pockets.
53-40-12 Lower Keel (Video)
53-40-12 Lower Keel Building the EMG-6: in this video we look at the installation of the fuselage lower keel assembly
Aero Towing the EMG-6 With the Quicksilver GT 500
Aero Towing the EMG-6 With the Quicksilver GT 500 In this video we look at the Aero towing process using the EMG-6 and the Quicksilver GT 500 with a Rotax 582 two-stroke engine as the tow plane.
53-40-11 Upper Keel (Video)
53-40-11 Upper Keel Building the EMG-6: in this video we show the installation procedures for the upper keel assembly
53-10-06A Instrument Panel (Video)
53-10-06A Instrument Panel Building the EMG-6: In this video we installed the instrument panel bulkhead subassembly
Twist Welding Cable (How To)
Twist Welding Cable (How To) In this segment of “Building the EMG-6” we look at a nifty little trick called Twist Welding. Used to treat the end of a cable so that it prevents unraveling and simultaneously necks down the end making it easier to …
Covering the Rudder Assembly (LD) (Video)
27-41 (Covering the Rudder Assembly LD) A Time Lapse look at the covering of the rudder assembly with polyfiber 1.8 oz glider cloth.
(27-41-00) Rudder Assembly (LD) (Video)
(27-41-00) Rudder Assembly (LD) In this episode of building the EMG_6 We assemble the Rudder Assembly for the Low Drag Rudder.
Rudder Spar Sub Assembly (Video)
(27-41-00-10) Rudder Spar Sub Assembly In this episode of building the EMG_6 We assemble the Rudder Spar Sub Assembly for the Low Drag Rudder assembly.
Corning Airport Information
FAA INFORMATION EFFECTIVE 25 JUNE 2015 Location FAA Identifier: 0O4 Lat/Long: 39-56-46.0000N / 122-10-16.0000W 39-56.766667N / 122-10.266667W 39.9461111 / -122.1711111 (estimated) Elevation: 295.6 ft. / 90.1 m (surveyed) Variation: 17E (1985) From city: 1 mile NE of CORNING, CA Time zone: UTC -7 (UTC -8 …
CNC Drilling and Cutting Fuselage Boom
Building The EMG-6 (CNC Drilling and Cutting Fuselage Boom) We’ve recently started working on the kits for the fuselage boom. The majority of the fuselage boom is built from 2024 T3 aluminum .040″ thick and all the components are CNC cut on the CNC router …
53-10-09-72 Passenger Rudder Pedal Tube Installation (Video)
Building The EMG-6 (53-10-09-72 Passenger Rudder Pedal Tube Installation) In this episode of building the EMG_6 We install the Passenger Rudder Pedal support tube for the fuselage frame
53-10-09-71 Seat To Gear Box Tube (Video)
Building The EMG-6 (53-10-09-71 Seat To Gear Box Tube) In this episode of building the EMG_6 We install the Seat To Gear Box tube for the fuselage frame
53-10-09.100 Brake Mount Tube (Video)
Building The EMG-6 (53-10-09.100 Brake Mount Tube) In this episode of building the EMG_6 We install the brake mount tube for the fuselage frame
51-60-10 Bushing Holder (Video)
Building The EMG-6 (51-60-10 Bushing Holder) In this episode of building the EMG_6 we go behind the scenes to see how we manufacture one of the EMG-6 parts from start to finish. Follow along as we design and manufacture (P/N 51-60-10 bushing holder) using solid …