Hangar 7

In this episode of building the EMG_6 we go behind the scenes to see how we manufacture one of the EMG-6 parts from start to finish. Follow along as we design and manufacture (P/N 51-60-10 bushing holder) using solid works and solid cam software and then cut and machine this integral part on the EMG-6

Another episode of "Building the EMG-6". In this episode we look at the process of marking tubing. Pretty much every component on the EMG 6 uses tubing for construction. In this video we show you how to accurately and easily mark tubing for these applications. Link to the Tube Marking Templates https://drive.google.com/folderview?id=0B6fcluqN5u3oUDI1R1BycExnYlE&usp=sharing

In this episode of building the EMG_6 We install the Passenger Rudder Pedal support tube for the fuselage frame

"Building The EMG-6 Series" Fuselage Frame Instrument Panel marking and cutting Fuselage Frame tubing using the PDF Files and the tube templates.