27-10 Aileron Control System
This section is dedicated to the Aileron Control System on the EMG-6. .
Links to Builders Data Base
[google-drive-embed url=”https://drive.google.com/embeddedfolderview?authuser=0&hl=en&id=0B6fcluqN5u3oSWtOYjZvMC1NOEU#list” title=”27-10 Aileron Control System” icon=”https://drive-thirdparty.googleusercontent.com/16/type/application/vnd.google-apps.folder+shared” width=”100%” height=”400″ extra=”folder” style=”embed”]
Related Posts
The gap seal system that we have developed for the EMG-6 electric motor glider is a substantial improvement over the ...
Tube Marking Tools Introducing a series of tube marking tools that can significantly improve the ease and accuracy of marking ...
Related You Tube Videos
Building The EMG-6 (51-60-10 Bushing Holder)
In this episode of building the EMG_6 we go behind the scenes to see how we manufacture one of the EMG-6 parts from start to finish. Follow along as we design and manufacture (P/N 51-60-10 bushing holder) using solid works and solid cam software and then cut and machine this integral part on the EMG-6
Tube Marking (Building the EMG-6)
Another episode of "Building the EMG-6". In this episode we look at the process of marking tubing. Pretty much every component on the EMG 6 uses tubing for construction. In this video we show you how to accurately and easily mark tubing for these applications.
Link to the Tube Marking Templates https://drive.google.com/folderview?id=0B6fcluqN5u3oUDI1R1BycExnYlE&usp=sharing