1st operational test of the predator 37 sustainer motor for the EMG-6. In reality the very 1st test was not caught on video. It lasted only a few seconds until we realized that the propeller was turning backwards and so we shut the motor down and reversed the outside leads on the motor and corrected the problem. The 1st test run was done without any instrumentation and everything worked well. The test was discontinued while we installed and optical tachometer. Once the optical tachometer and the motor temperature sensor were installed we reassembled everything and ran the next test which you can see in the video. The optical tachometer sensor was not functioning as it should so we stopped once again removed the optical tachometer sensor and wired in a sensor directly into the motor. This is also shown on the video and the initial test showed erratic tachometer operation. So we once again disassembled the system and properly soldered in the leads into the motor wires. Everything on the sustainer motor system is now operational and we should be able to start flight test soon.