Latest Posts

Blog Posts

EMG-6 "Shop Notes" July 2017

July 19, 2017:  Off to Oshkosh The voyage to Oshkosh begins. The 4300 mile round trip journey, has in the past, always been quite eventful. There is always something that goes wrong. We are hoping [...]

July 15, 2017 // 2 Comments

57-80-10 Large Gap Seal

The gap seal system that we have developed for the EMG-6 electric motor glider is a substantial improvement over the traditional gap seal system used on most ultralights. The most common gap seal [...]

July 15, 2017 // 0 Comments


Great news, We finally settled on our next electric propulsion system. MGM Compro REX 30 is on order, and Martin Dvorsky, the owner of MGM Compro as promised to have a motor and controller for us to [...]

July 10, 2017 // 2 Comments

57-45 Jury Stuts

This post contains a summary of information related to the manufacturing and assembly of the wing jury strut sub-assemblies.  The – 45 jury struts are the streamlined strut version. A standard [...]

July 3, 2017 // 0 Comments

The Invasion of the Drones

The Invasion of the Drones Like it or not drone technology is not only here to stay, we are confident that in the very near future, the infiltration of drone technology will completely revolutionize [...]

June 30, 2017 // 0 Comments

EMG-6 "Shop Notes" June 2017

  June 28, 2017 It’s time for an update. We continue  our frenetic pace getting ready for Oshkosh. Most everything that we been working on for the last week has been detail stuff. The [...]

June 2, 2017 // 4 Comments

02-10 3D Printed Tube Marking Tools

Tube Marking Tools Introducing a series of tube marking tools that can significantly improve the ease and accuracy of marking round tubing. These tube marking tools have a multitude of features which [...]

June 1, 2017 // 0 Comments

EMG-6 "Shop Notes" May 2017

“EMG-6 Shop Notes” is a day-to-day accounting of what’s going on in the shop with the EMG-6 Electric Motor Glider.   May 29, 2017 We have added another series of drawings to [...]

May 29, 2017 // 0 Comments

Getting Started

  How to Get Started Building the EMG-6      Updated May 20, 2017 1  Follow the Project Progress Blog (Shop Notes) The “Shop Notes” blog follows the progress as we design, build, and [...]

May 21, 2017 // 7 Comments

EMG-6 "Shop Notes" March 2017

“EMG-6 Shop Notes” is a day-to-day accounting of what’s going on in the shop with the EMG-6 Electric Motor Glider. March 24, 2017 The elevator control horn being machined from .125 [...]

March 24, 2017 // 0 Comments