Bing Carburetor 3D Modeled In SolidWorks These videos are a pre-release that are part of a larger series of videos compiling the step-by-step process of modeling all of the components on a Bing carburetor. The introductory video will not be completed until after all of …
EMG-6 "Shop Notes" September 2016
“EMG-6 Shop Notes” is a day-to-day accounting of what’s going on in the shop with the EMG-6 Electric Motor Glider. September 16, 2016 Production of Kits Continues kit production continues. Jason has been putting together the subassembly kits and in this picture here he is …
Aero-TV: Rainbow Aviation’s EMG-6 – The Cutest Motor Glider (Video)
Aero-TV: Rainbow Aviation's EMG-6 - The Cutest Motor Glider Interview with Aero TV at AirVenture 2016
Builder Charlie Becker S/N 15-024 Oshkosh Wisconsin
Builder Charlie Becker S/N 15-024 Oshkosh Wisconsin September 12, 2016 Charlie gets his landing gear mounted to the fuselage 4130 chromoly steel frame. Charlie is still currently in the lead for the 1st customer built EMG-6. This picture is indicative of Charlie’s enthusiasm for aviation …
3D Printed Vortex Generators Part 4 (Video)
In part 4 of 3D printed vortex generators video, we go through the complete process of designing a vortex generator in SOLIDWORKS, exporting an STL file to the Zortrax software, and then printing and extracting the 3D printed vortex generator.
3D Printed Vortex Generators Part 3 (Video)
3-D printed vortex generators part 3. In this video we step through the installation process and placement of vortex generator using a template and commercial grade double sticky tape. 3D Vortex Generators Video Part 2 https://youtu.be/XhDEQD9kYw0 3D Vortex Generators Video Part 1 https://youtu.be/PZC-dYbzNHI
3-D Modeling Software “Home Built meets High-Tech”
August 2016, "Technically Speaking Article", Sport Aviation Magazine August 2016 Loading... Taking too long? Reload document | Open in new tab