3D Printed Vortex Generators Part 2 (Video)

3-D printed vortex generators part 2. In this video we step through the installation process and placement of vortex generator version 1-150. We do a comparative analysis from the baseline tests that we conducted in part 1, and provide some analysis of the process. We …

Advertisements

3D Printed Vortex Generators Part 1 (Video)

In this video we begin the baseline testing for the 3-D printed vortex generator article. The baseline test was to get a video of the tuft tested wing as a comparative analysis against the additional tests that will be conducted with different 3-D printed vortex …

Stronger 3-D Printed Parts (Part 1)

July 2016, "Technically Speaking Article", Sport Aviation Magazine  Carol and Brian Carpenter started writing the "Technically Speaking" column for EAA's Sport Aviation / Experimenter Magazine back in May of 2015.  The articles have become recognized for their focus on improving knowled and saftey in the Light ...

Icom IC-A6 / IC-A24A Radio Mount (3D Printed)

3-D Printed Handheld Radio Mount Although originally designed for the a Piper J-3 Cub, hence the color.  This mount can be used on any aircraft including the EMG-6. The radio mount is designed with a split clamp system which allows the installation and positioning on …